Connecting An Analog Vcr To The Computer Via Your Camcorder; (Dv Format Models Only) - Signal Convert Function - Sony Handycam DCR-PC330 Application Manual

Connecting an analog
VCR to the computer
via your camcorder
(DV format models
only)
— Signal convert function
: Signal flow
* The supplied A/V connecting cable has a video
plug and S video plug. You need to set which plug
to use depending on the equipment to be connected.
For details, refer to the separate Camera Operations
Guide supplied with your camcorder.
You can convert an analog signal output from
an analog device such as a VCR to a digital
signal and transfer it to a digital device, such as
a computer, via your camcorder.
Select the (STANDARD SET) menu,
[DISPLAY], then [LCD PANEL] (default
setting). For details, refer to the separate
Camera Operations Guide supplied with your
camcorder.
DV Interface
to i.LINK (IEEE1394)
connector
A/V connecting cable
(supplied)
A/V (audio/video)
jack
i.LINK cable (optional)
*
(White)
(Red)
AUDIO/VIDEO
jacks
VCR (analog)
To carry out this operation, you need a software
application (such as ImageMixer Ver.1.5 for
Sony) that can read a video signal installed on
your computer.
ImageMixer Ver.1.5 for Sony is used to
describe the operation in this section.
(Yellow)
S video
plug (Black)
,continued
37
Other functions