Quickly locating a
scene
– ZERO SET MEMORY
Your camcorder goes forward or backward to
automatically stop at a desired scene having a
tape counter value of "0:00:00".
Use the Remote Commander for this operation.
Use this function, for example, to view a desired
scene later on during playback.
(1) In the playback mode, press DISPLAY.
(2) Press ZERO SET MEMORY at the point you
want to locate later. The tape counter shows
"0:00:00" and the ZERO SET MEMORY
indicator flashes on the screen.
(3) Press x when you want to stop playback.
(4) Press m to rewind the tape to the counter's
zero point. The tape stops automatically when
the counter reaches approximately zero. The
ZERO SET MEMORY indicator disappears,
and the time code appears.
(5) Press N. Playback starts from the counter's
zero point.
Notes
•The zero set memory function works only for
tapes recorded in the Digital8
•When you press ZERO SET MEMORY before
rewinding the tape, the zero set memory
function is cancelled.
•There may be a discrepancy of several seconds
from the time code.
If a tape has a blank portion between
recorded portions
The zero set memory function may not work
correctly.
88
DISPLAY
m
x
system.
(1)
(2)
(3)
x
(4)
m
(5)
N
ZERO SET
MEMORY
N
•
•
•