Using "Memory Stick"
– Introduction
Inserting "Memory Stick"
Insert a "Memory Stick" in the "Memory Stick"
slot as far as it can go with the b mark facing
toward the "Memory Stick" slot as illustrated.
Ejecting the "Memory Stick"
Press the "Memory Stick" once lightly.
When the access lamp is lit or flashing
Do not shake or knock your camcorder because
your camcorder is reading the data from the
"Memory Stick" or recording the data on the
"Memory Stick". Do not turn the power off, eject
the "Memory Stick" or remove the battery pack.
Otherwise, image data may become damaged.
If "
MEMORY STICK ERROR" is displayed
Reinsert "Memory Stick" a few times. The
"Memory Stick" may be damaged if the indicator
is still displayed. If this occurs, use another
"Memory Stick."
152
Access lamp/
b
b mark/