Viewing images recorded on a
tape on your computer (Windows
users only)
(4) Follow the on-screen messages to install the
USB driver.
(5) Connect the AC power adaptor to your
camcorder and then to a wall socket.
(6) Set the POWER switch to CAMERA or
PLAYER.
(7) Select USB STREAM to ON in
menu settings (p. 127).
(8) With the CD-ROM inserted, connect the USB
jack on your camcorder to the USB connector
on your computer using the supplied USB
cable.
Your computer recognizes the camcorder,
and the Windows Add Hardware Wizard
starts.
(9) Follow the on-screen messages so that the
Add Hardware Wizard recognizes that the
USB drivers have been installed. The Add
Hardware Wizard starts three times because
three different USB drivers are installed. Be
sure to allow the installation to complete
without interrupting it.
If the "Files Needed" screen appears (For
Windows 2000 Professional/Windows XP users)
(10)Insert the supplied CD-ROM into the CD-
ROM drive of your computer, then select
"Browse..." t "My Computer" t
"ImageMixer" t "sonyhcb.sys", and click
the "OK" button.
When the installation is complete, go to
"Installing 'PIXELA ImageMixer Ver.1.0 for
Sony'" on page 121.
(4)
(5)
(6)
in the
(7)
(8)
(USB) jack/
(9)
(10)
USB connector/
USB cable (supplied)/
t
t
t
117