Sony Handycam DCR-TRV340E Operating Instructions Manual page 137

Changing the menu settings
Icon/item Mode
DATA CODE z DATE/CAM
WORLD TIME
BEEP
z MELODY
COMMANDER z ON
DISPLAY
z LCD
In more than five minutes after removing the power source
The AUDIO MIX, FLASH LVL, COMMANDER and HiFi SOUND settings are returned to their default
settings.
Other menu settings are held in memory even when the battery is removed.
Meaning
To display date, time and recording data during
playback
DATE To display date and time during playback
— To set the clock to the local time
Turn the SEL/PUSH EXEC dial to set a time
difference. The clock changes by the time difference
you set here. If you set the time difference to 0, the
clock returns to the originally set time.
To output the melody when you start/stop recording
or when an unusual condition occurs on your
camcorder
NORMAL To output the beep instead of the melody
OFF To cancel all sound including shutter sound
To activate the Remote Commander supplied with
your camcorder
OFF To deactivate the Remote Commander to avoid
erroneous remote control operation caused by other
VCR's remote control
To show the display on the LCD screen and in the
viewfinder
V-OUT/LCD To show the display on the TV screen, LCD screen
and in the viewfinder
(continued on the following page)
POWER
switch
PLAYER
MEMORY
CAMERA
MEMORY
CAMERA
PLAYER
MEMORY
CAMERA
PLAYER
MEMORY
CAMERA
PLAYER
MEMORY
137