Sony Handycam DCR-TRV340E Operating Instructions Manual page 193

Viewing images recorded on
"Memory Stick"s on your
computer
(1) Turn on the power of your computer and
allow Windows to load.
(2) Insert the supplied CD-ROM into the CD-
ROM drive of your computer. The application
software screen appears.
(3) Move the cursor to "USB Driver" and click.
This starts USB driver installation.
(4) Follow the on-screen messages to install the
USB driver.
(5) Insert a "Memory Stick" into your camcorder,
connect the AC power adaptor and set the
POWER switch to MEMORY.
(6) Connect the (USB) jack on your camcorder
with the USB connector on your computer
using the supplied USB cable.
USB MODE appears on the LCD screen of
your camcorder. Your computer recognizes
the camcorder, and the Windows Add
Hardware Wizard starts.
(7) Follow the on-screen messages to make the
Add Hardware Wizard recognize the
hardware. The Add Hardware Wizard starts
two times because two different USB drivers
are installed. Be sure to allow each installation
to complete without interrupting them.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(USB) jack/
USB connector/
USB cable/
193