Sony Handycam DCR-TRV340E Operating Instructions Manual page 111

Dubbing only desired scenes
– Digital program editing
(on tapes)
Erasing the programme you have set
Erase OUT first and then IN from of the last
programme.
(1) Turn the SEL/PUSH EXEC dial to select
UNDO, then press the dial.
(2) Turn the SEL/PUSH EXEC dial to select
EXECUTE, then press the dial.
The last set programme mark flashes, then the
setting is cancelled.
To cancel erasing
Select RETURN in step 2.
Erasing all programmes
(1) For DCR-TRV238E/TRV239E:
Turn the SEL/PUSH EXEC dial to select
VIDEO EDIT, then press the dial.
For DCR-TRV340E:
Select VIDEO EDIT in the menu settings. Turn
the SEL/PUSH EXEC dial to select TAPE,
then press the dial.
(2) Select ERASE ALL in the menu settings. Turn
the SEL/PUSH EXEC dial to select EXECUTE,
then press the dial.
All the programme marks flash, then the
settings are cancelled.
To cancel erasing all programmes
Select RETURN in step 2.
To cancel a programme you have set
Press MENU.
The programme is stored in memory until the
tape is ejected.
Notes
•Digital program editing does not work when
PB MODE is set to
settings.
•You cannot operate recording during Digital
program editing.
/ in the menu
(1)
(2)
(1)
(2)
•
•
111