Sony Handycam DCR-TRV340E Operating Instructions Manual page 131

Changing the menu settings
Icon/item Mode
HiFi SOUND z STEREO
TBC* z ON
TBC stands for "Time Base Corrector".
DNR* z ON
DNR stands for "Digital Noise Reduction".
AUDIO MIX
NTSC PB
z ON PAL TV
PB MODE z AUTO
* When you play back tapes recorded in the Hi8/standard 8 system only
Notes on AUDIO MIX
•When playing back a tape recorded in the 16-bit mode, you cannot adjust the balance.
•You can adjust the balance only for tapes recorded in the Digital8
Notes on NTSC PB
When you play back a tape on a Multi System TV, select the best mode while viewing the picture on
the TV.
Note on PB MODE
The mode will return to the default setting when:
– you remove the battery pack or power source.
– you turn the POWER switch.
Meaning
To play back a stereo tape or dual sound track tape
with main and sub sound (p. 238)
1 To play back a stereo tape with the left sound or a
dual sound track tape with main sound
2 To play back a stereo tape with the right sound or a
dual sound track tape with sub sound
To correct jitter
OFF To not correct jitter. Set TBC to OFF when playing
back a tape on which you have dubbed over and
recorded the signal of a TV game or similar machine.
To reduce picture noise
OFF To reduce a conspicuous afterimage when the picture
has a lot of movement
— To adjust the balance between the stereo 1 and
stereo 2
To playback a tape recorded on your camcorder on a
PAL system TV
NTSC 4.43 To playback a tape recorded in the NTSC colour
system on a TV with the NTSC 4.43 mode
To automatically select the system (Hi8/standard 8
or Digital8
and play back the tape
/
To play back a tape that was recorded in the Hi8/
standard 8 system when your camcorder does not
automatically distinguish the recording system
ST1 ST2
) that was used to record on the tape,
system.
(continued on the following page)
POWER
switch
PLAYER
PLAYER
PLAYER
PLAYER
PLAYER
PLAYER
131