Step 2 Setting The Date And Time - Sony Handycam DCR-TRV340E Operating Instructions Manual

Step 2 Setting the
date and time
Set the date and time settings when you use your
camcorder for the first time.
"CLOCK SET" will be displayed each time that
you set the POWER switch to CAMERA/
MEMORY (DCR-TRV340E only) unless you set
the date and time settings.
If you do not use your camcorder for about half a
year, the date and time settings may be cleared
from memory (bars may appear) because the
built-in rechargeable battery installed in your
camcorder will have been discharged (p. 246).
Set the year, then the month, the day, the hour
and then the minute.
(1) Set the POWER switch to CAMERA or
MEMORY (DCR-TRV340E only), and then
press MENU to display the menu settings.
(2) Turn the SEL/PUSH EXEC dial to select
CLOCK SET in , then press the dial.
(3) Turn the SEL/PUSH EXEC dial to adjust the
desired year, then press the dial.
(4) Set the month, day and hour by turning the
SEL/PUSH EXEC dial and pressing the dial.
(5) Set the minute by turning the SEL/PUSH
EXEC dial and pressing the dial by the time
signal. The clock starts to move.
(6) Press MENU to make the menu settings
disappear.
(1)
(2)
(3)
(4)
(5)
(6)
23