Charging The Battery Pack - Sony Handycam DCR-TRV340E Operating Instructions Manual

Step 1 Preparing the power
supply

Charging the battery pack

Use the battery pack after charging it for your
camcorder.
Your camcorder operates only with the
"InfoLITHIUM" battery pack (M series).
See page 239 for details of "InfoLITHIUM"
battery pack.
(1) Open the DC IN jack cover and connect the
AC power adaptor supplied with your
camcorder to the DC IN jack with the plug's v
mark facing up.
(2) Connect the mains lead to the AC power
adaptor.
(3) Connect the mains lead to a wall socket.
(4) Set the POWER switch to OFF (CHG).
Charging begins. The remaining battery time
is indicated in minutes on the display
window.
When the remaining battery indicator changes to
u, normal charge is completed. To fully charge
the battery (full charge), leave the battery pack
attached after normal charge is completed until
FULL appears on the display window. Fully
charging the battery allows you to use the battery
longer than usual.
4
The number in the illustration of the display
18
window may differ from that on your camcorder.
2
(1)
v
(2)
(3)
(4)
u
1