Radio Frequency Interference - Invacare Perfecto2 Series User Manual
Oxygen concentrators with senso2 homefill compatible
Hide thumbs
Also See for Perfecto2 Series:
- User manual (204 pages) ,
- Operator's manual (200 pages) ,
- Manual (2 pages)
Table of Contents
Advertisement
Available languages
Available languages
Radio Frequency Interference
This equipment has been tested and found to comply with
EMC limits specified by IEC/EN 60601-1-2. These limits are
designed to provide a reasonable protection against
electromagnetic interference in a typical medical installation.
Other devices may experience interference from even the low
levels of electromagnetic emissions permitted by the above
standards. To determine if the emissions from the Perfecto
causing the interference, turn the Perfecto
interference with the other device(s) stops, then the Perfecto
is causing the interference. In such rare cases, interference
may be reduced or corrected by one of the following
measures:
• Reposition, relocate, or increase the separation
between the equipment.
• Connect the equipment into an outlet on a circuit
different from that to which the other device(s) is
connected.
Part No 1163147
SECTION 1—GENERAL GUIDELINES
9
Off. If the
2
Perfecto
™Series
2
is
2
2
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the Perfecto2 Series and is the answer not in the manual?
Questions and answers
Can the level of oxygen be increased on the machine. Currently it shows a maximum 5 liter flow
No, the Invacare Perfecto2 Series oxygen machine has a maximum flow rate of 5 L/min. Setting the flow above this level may decrease the oxygen concentration.
This answer is automatically generated
Is there a place to lubricate this unit. it is terribly nosiey?
Can this be lubricated to cut down on the noise. Its like sleeping with an MRI machine.