Section 5-Typical Product Parameters - Invacare Perfecto2 Series User Manual

SECTION 5—TYPICAL PRODUCT
PARAMETERS
NOTE: All parameters apply to both concentrator models (IRC5PO2AW and IRC5PO2V AW)
unless otherwise specified.
IPX1
Electrical
Requirements:
Rated Current Input:
Sound Level:
Altitude:
Oxygen Output
Concentration Levels:
Maximum Outlet
Pressure:
Part No 1163147
SECTION 5—TYPICAL PRODUCT PARAMETERS
Alternating Current
Type BF equipment
Unit running
Unit not running
Attention - Consider Accompanying Documents
DO NOT smoke
Class II, Double Insulated
Protected against dripping water
No open flame
RISK OF ELECTRIC SHOCK
This product complies with Directive 93/42/EEC concerning medical
devices.
The launch date of this product is stated in the CE
declaration of conformity.
230 VAC ± 10% (253 VAC/207 VAC), 50 Hz
1.5 A
40 dBA Average
Up to 6,000 ft (1828 meters) above sea level without degradation of
concentration levels. Not recommended for use above 6,000 ft
(1828 meters).
Atmospheric pressure range: 101.33kPa - 81.22kPa
87% to 95.6% at 0.5 to 5 L/min
93% ± 3% at 2 L/min
NOTE: Stated concentration levels achieved after initial warm-up
period (approximately 30 minutes).
34.5 kPa ± 3.45 kPa (5 psi ± 0.5 psi)
13 Perfecto ™Series
2