Table 4-2 Dil-Switches In Compatibility Mode - Siemens OLM/P11 V4.0 Operating Instructions Manual

Product Characteristics
4.2 Installation
The significance of the DIL switches of the OLM when S7=1 for:
SINEC L2FO
OLM/P3 and OLM/P4
S6 Output power CH4
0
1
S5 Output power CH3
0
1
S4
S3
S2
0
1
S1 Mode
0 Line/ring
1 Line
S0
S8
OLM/P3: S6 reserved
Table 4-2 DIL-switches in compatibility mode
4.2.3.2 Setting the mode
Notice! The following information is only valid for the default setting of S7 (S7 = 0),
this means compatibility is disabled!
The mode of the electrical channel CH1 is set with DIL switch S0. The mode of
optical channel CH2 is set with DIL switches S1 and S2. The mode of optical
channel CH3 is set with DIL switches S3 and S4. If the OLM has only one optical
interface, S3 and S4 have no function.
4.2.3.3 Setting the mode of the electrical channel (CH1)
Mode "electrical channel with segment monitoring"
CH1 is set to this mode, when S0 is in position 0.
SIMATIC NET PROFIBUS, Optical Link Module
Operating Instructions, 07/2008, A2B00065774O, Edition V1.5
SINEC L2FO
OLM/S3 and OLM/S4,
OLM/S3-1300 and OLM/S4-1300
Standard
High
Standard
High
Reserved
Reserved
Redundancy
Off
On
Monitor
On
Off
Reserved
Reserved
OLM/S3, OLM/S3-1300: S2 reserved
S6 Reserved
S5 Reserved
S4 Reserved
S3 Distance
0 Extended
1 Standard
S2 Redundancy
0 Off
1 On
S1 Mode
0 Line/Ring
1 Line
S0 Reserved
S8 Reserved
Monitor
On
Off
23