Table of Contents
Advertisement
Available languages
Available languages
Display symbols:
- (
)
Summer / DHW settings
- (
) Winter
- (
)
Only Winter / CH settings
- (
)
Cooling
- (
)
OFF, system off
- (
) Time program
- (
) Manual operation
- (
)
Desired room temperature
- (
Room temperature detected
- (
)
Desired room temperature override
- (
)
Outdoor temperature
- (
)
AUTO function enabled
- (
)
HOLIDAY function enabled
- (
)
Central heating active
- (
)
Domestic hot water active
- (
)
Error indication
- (
)
Menu
- (
)
System performance
- (
)
Screen setting
- (
)
Floor Heating
- (
)
Circulation pump
- (
)
Valvola deviatrice
- (
ST1) Under-fl oor heating system thermostat
- (
)
Anti-frost function
- (
)
Thermal Cleanse Function
- (
)
Confi gurable device
- (
)
Heat pump
- (
)
Heating element 1
- (
)
Heating element 2
- (
)
Heating element excluded
- (
)
Manual mode HC
- (
)
DHW comfort in period at a reduced rate
setpoint up to 40 ° C during the period at the full rate
- (
)
BOOST mode
- (
)
Silent mode
- (
)
Special function
- (
)
Dehumidifi cation
16 /
1
Initial start-up
The fi rst time the EXPERT CONTROL system interface is connected,
the user is required to choose certain basic settings.
First, you will need to select the user interface language.
Turn the knob and select the desired language, then press the OK but-
ton to confi rm. Move on to setting the date and time. Turn the knob to
make a selection, press the OK button to confi rm your selection, turn
the knob to set the value.
Press the OK button to confi rm.
Save the settings by pressing OK.
Press the OK button to access the Menu. Use the knob in the centre
to scroll through the menu list and select a parameter, then press OK
to confi rm.
NOTE
Some parameters are protected with an access code (safety code)
which protects the boiler settings from unauthorised use.
OK
2
3
4
Hide quick links:
Advertisement
Chapters
Table of Contents
