Heating Schedule Programming - Ariston NIMBUS User Manual

- Days remaining
if there are any days which have not yet been programmed, then
repeat the steps described above.
Turn the knob and select:
- Modify
to change any previously programmed periods
Turn the knob and select:
- Exit
to exit schedule programming.
Press the OK button to confi rm.
The display reverts to showing the previous screen.
Press the back button " " to return to the main screen.
To facilitate schedule programming procedures, confi guration can be
carried out via:
- Wizard tme programming
- Preset programs
Turn the knob and select:
- WIZARD TME PROGRAMMING
Press the OK button.
Turn the knob and select the zone in which you wish to apply schedule
programming.
Press the OK button.
Turn the knob and select:
- Set time program
Press the OK button.
Now follow the step-by-step instructions which appear on the display
from time to time.
- PRESET PROGRAMS
Press the OK button.
Turn the knob and select the zone in which you wish to apply schedule
programming.
Press the OK button.
Turn the knob and select:
- Set time program
Press the OK button.
Turn the knob and select among the following:
- Family program
- No lunch program
- Midday program
- Always active
Press the OK button to confi rm.
Turn the knob to scroll through the days and the heating program start
and end time.
Turn the knob and select save, then press the OK button.
Press the back button " " to return to the previous screen.
- TIME PROGRAM/MANUAL MODE
(this mode can be used to select either programmed or manual zone
heating or cooling management)
Press the OK button.
Turn the knob and select the zone to which you wish to apply the set-
ting. Select scheduled or manual programming.
Press the OK button.
Press the back button " " to return to the previous screen.
Simply turn the knob to adjust the temperature.
20 /
Selecting days heating schedule programming
Setting comfort periods heating schedule programming
Selecting half-day program
Selecting operating mode for zone 2