WAGNER PLAST COAT HP 30 Operating Manual page 26

GB
TABLE OF CONTENTS
Table of Contents
1 SAFETY REGULATIONS ______________________ 27
2 INTRODUCTION TO WORKING WITH
PLASTCOAT HP 30 ___________________________ 29
2.1 Function of the PlastCoat HP 30 _________________ 29
2.2 Processible coating materials ___________________ 29
3 TECHNICAL DATA ___________________________ 29
4 EXPLANATORY DIAGRAM FOR PLASTCOAT HP30 30
4.1 Operating elements and displays on device _______ 31
4.2 Drive _______________________________________ 31
5 TRANSPORTATION __________________________ 32
5.1 Moving _____________________________________ 32
5.2 Transport using a crane (fig. 4) __________________ 32
5.3 Transportation in vehicle ______________________ 32
6 COMMISSIONING ___________________________ 32
6.1 Installation location ___________________________ 32
6.1.1 Connection to mains power supply/ Extension cable 32
6.2 Initial starting-up _____________________________ 32
6.2.1 Scope of supply ______________________________ 32
6.3 Connect the high-pressure hose and gun _________ 33
6.4 Preparing the machine (fig. 6) __________________ 33
6.5 Beginning of the spraying process _______________ 34
6.6 Interruptions of work / Breaks __________________ 34
6.7 End of the spraying process / End of work _________ 34
7 GENERAL INFORMATION ABOUT THE
APPLICATION TECHNIQUE ___________________ 35
7.1 Spraying technique ___________________________ 35
8 SHUTTING DOWN AND CLEANING ____________ 35
9 MAINTENANCE _____________________________ 36
9.1 Mechanical maintenance ______________________ 36
9.2 Electrical maintenance ________________________ 36
9.3 Long periods of non-usage _____________________ 36
9.4 Replace the stator and rotor ____________________ 37
9.5 Shaft seal ___________________________________ 38
10 ELIMINATING FAULTS ________________________ 39
11 SPARE PARTS LIST FOR PLASTCOAT HP30 ______ 42
11.1 Spare parts list frame _________________________ 43
13 PLASTCOAT HP30 ACCESSORIES ______________ 44
26
Testing of the mortar spraying machine _______________ 46
Note on disposal __________________________________ 46
Important information on product liability_____________ 46
Guarantee declaration _____________________________ 46
CE declaration of conformity ________________________ 47
European service network __________________________ 92
Plast Coat HP 30