WAGNER PLAST COAT HP 30 Operating Manual page 25

Plast Coat HP 30
Translation of the original operating instructions
Never bring fingers, hands or other body parts into contact with the spray jet!
1
Never point the spray gun at yourself, other persons or animals.
Never use the spray gun without spray jet safety guard.
Do not treat a spray injury as a harmless cut. In case of injury to the skin by coating material
or solvents, consult a doctor for quick and correct treatment. Inform the doctor about the
coating material or solvent used.
The following points are to be observed in accordance with the operating manual
2
before every start-up:
1. Faulty units may not be used.
2. Secure a Wagner spray gun.
3. Ensure earthing.
4. Check the permissible operating pressure of the high-pressure hose and spray gun.
5. Check all the connecting parts for leaks.
Instructions for regular cleaning and maintenance of the unit are to be observed
3
strictly.
Observe the following rules before any work on the unit and at every working break:
1. Relieve the pressure from the spray gun and high-pressure hose.
2. Secure a Wagner spray gun.
3. Switch the unit off.
WARNING!
Attention, danger of injury by injection!
Unit develops extremely high spray pressures.
Ensure safety!
GB
25