End Search - Sony Handycam DCR-PC3 Operating Instructions Manual

Recording a picture

END SEARCH

You can go to the end of the recorded section after you record.
(1) In the standby mode, press FN to display PAGE1 (p. 15).
(2) Press END SCH.
The last 5 seconds of the recorded section are played back and playback stops. You can
monitor the sound from the speaker or headphones.
To return to FN
Press EXIT.
To stop searching
Press END SCH again.
End search function
When you use a tape without cassette memory, the end search function does not work
once you eject the cassette after you have recorded on the tape. If you use a tape with
cassette memory, the end search function works even once you eject the cassette.
If there is a blank portion in the recorded portion, the end search function may not
work correctly (p. 111).
25