Searching The Boundaries Of Recorded Tape By Title - Title Search - Sony Handycam DCR-PC3 Operating Instructions Manual

Searching the boundaries of recorded tape by
title – Title search
(1) Set the POWER switch to VTR.
(2) Press FN to display PAGE1 (p. 15).
(3) Press MENU, then set CM SEARCH in
(4) Press SEARCH MODE on the Remote Commander repeatedly, until the title
(5) Press . or > on the Remote Commander to select the title for playback.
4
SEARCH
MODE
5
=
To stop searching
Press x on the Remote Commander.
If you use a tape without cassette memory
You cannot superimpose or search a title.
In the
•The bar in the
•The
If a tape has a blank portion between recorded portions
The title search function may not work correctly.
To superimpose a title
See page 69.
52
If you use a tape with cassette memory, you can search for the boundaries of
recorded tape by title (Title search). Use the Remote Commander for this
operation.
Default setting is ON.
search indicator appears.
The indicator changes as follows:
TITLE SEARCH t DATE SEARCH t PHOTO SEARCH t PHOTO SCAN
t no indicator
Your camcorder automatically starts playback of the scene having the title that
you selected.
TITLE SEARCH
1 HELLO!
2 CONGRATULATIONS!
3 HAPPY NEW YEAR!
4 PRESENT
5 GOOD MORNING
6 WEDDING
TITLE SEARCH
3 HAPPY NEW YEAR!
+
4 PRESENT
5 GOOD MORNING
6 WEDDING
7 NIGHT
8 BASEBALL
mark
mark indicates the present point on the tape.
mark in the
to ON in the menu settings (p. 76).
2
indicates the actual point you are trying to search.
1
POWER
FN
OFF