Playing Back A Tape With Digital Effects - Sony Handycam DCR-PC3 Operating Instructions Manual

Playing back a tape with digital effects

During playback, you can process a scene using the digital effect functions: STILL,
FLASH, LUMI. and TRAIL.
(1) In the playback mode or the playback pause mode, press FN and select PAGE2
(2) Press DIG EFFT. The screen to select a desired digital effect mode appears.
(3) Select a desired digital effect mode. In the STILL or LUMI. mode, the picture
(4) Press –/+ to adjust the effect. Refer to page 39 for details.
(5) Press
To return to FN
Press EXIT.
To cancel the digital effect function
Press
Notes
•You cannot process externally input scenes using the digital effect function.
•To record pictures that you have processed using the digital effect, record the pictures
on the VCR using your camcorder as a player.
Pictures processed by the digital effect function
Pictures processed by the digital effect function are not output through the DV IN/
OUT jack.
When you set the POWER switch to OFF or stop playing back
The digital effect function is automatically canceled.
48
(p. 15).
where you select the mode is stored in memory as a still picture.
OK to return to PAGE1/PAGE2.
1
FN
OFF to return to PAGE1/PAGE2.
2,3
DIG
DIG EFFT
EFFT
STILL
OFF OK
FLASH LUMI. TRAIL