Sony Handycam DCR-PC3 Operating Instructions Manual page 27

Playing back a tape
When monitoring on the LCD screen
You can turn the LCD panel over and move it back to the camcorder body with the
LCD screen facing out.
If you leave the power on for a long time
Your camcorder gets warm. This is not a malfunction.
When you open/close the LCD panel
Open/close the LCD panel vertically.
When monitoring in the viewfinder
Turn the LCD panel over and move it back to the camcorder body with the LCD screen
facing out, and pull out the viewfinder until it clicks (p. 110). In this case, the picture is
not displayed on the LCD screen.
27