Step 3 Using A Touch Panel - Sony Handycam DCR-PC3 Operating Instructions Manual

Step 3 Using a touch panel

Your camcorder has operation buttons on the LCD screen. Touch the LCD panel
directly to operate each function.
In the recording/playback mode
(1) Prepare the power supply (p. 9).
(2) Set the POWER switch to CAMERA (in the recording mode)/VTR (in the
playback mode) while pressing the small green button.
(3) Press OPEN to open the LCD panel.
(4) Press FN. Operation buttons appear on the LCD screen.
(5) Press PAGE2 to go to PAGE2. Operation buttons appear on the LCD screen.
(6) Press a desired operation item. Refer to relevant pages for each function.
5,6
In CAMERA mode
PAGE1 PAGE2
MENU
FADER DIG
PAGE1 PAGE2
TITLE
To return to FN
Press EXIT.
To execute settings
Press EXEC or
To cancel settings
Press OFF to return to PAGE1/PAGE2.
EXIT
END
SCH
MEM EXPO–
EFFT MIX SURE
EXIT
LCD VOL
BRT
OK.
4
FN
3
2
POWER
OFF
1
15