Step 1 Preparing The Power Supply; Charging The Battery Pack - Sony Handycam DCR-PC3 Operating Instructions Manual

Step 1 Preparing the power supply

Charging the battery pack

Use the battery pack after charging it for your camcorder.
Your camcorder operates only with the "InfoLITHIUM" battery pack (S series).
"InfoLITHIUM" is a trademark of Sony Corporation.
(1) Connect the power cord to the AC adaptor.
(2) Align the hooks of the battery pack with the AC adaptor. Then fit the battery
pack in the direction of the arrow.
(3) Connect the power cord to a wall outlet. The CHARGE lamp (orange) lights
up. Charging begins.
When the CHARGE lamp goes out, normal charge is completed. For full charge,
which allows you to use the battery longer than usual, leave the battery pack in place
for approximately one hour after the CHARGE lamp goes out.
1
Charging time
Battery pack
NP-FS11 (supplied)
NP-FS21
NP-FS31
NP-F10
NP-F20
NP-F30
Approximate number of minutes to charge an empty battery pack
2
Full charge (Normal charge)
170 (110)
265 (205)
360 (300)
145 (85)
220 (160)
295 (235)
3
CHARGE
9