Using A Touch Panel - Sony Handycam DCR-PC3 Operating Instructions Manual

Using a "Memory Stick"–introduction

Using a touch panel

Your camcorder has operation buttons on the LCD screen. Press the LCD panel directly
to operate each function.
(1) Set the POWER switch to MEMORY while pressing the small green button.
(2) Press OPEN to open the LCD panel. Operation buttons appear on the LCD
(3) Press FN. Operation buttons appear on the LCD screen.
(4) Press PAGE2 to go to PAGE2. Operation buttons appear on the LCD screen.
(5) Press a desired operation item.
4,5
In memory camera mode
2
To execute settings
Press EXEC or
To cancel settings
Press
To return to FN
86
Press EXIT.
Make sure that the LOCK is set to the right (unlock) position.
screen. You can switch the memory playback/the memory camera mode by
pressing PLAY/CAM. You can also use the Remote Commander for this
operation.
Refer to relevant pages for each function.
PAGE1 PAGE2 EXIT
MENU PLAY INDEX EXPO–
SURE
PAGE1 PAGE2 EXIT
LCD PLAY INDEX
BRT
In the memory
camera mode
PLAY INDEX FN
OK.
OFF to return to PAGE1/PAGE2.
1
2
In the memory
playback mode
– +
CAM INDEX FN
POWER
OFF
3
FN