Menu List - Sony HXCU-FB80 4K/HD Operating Instructions Manual

Menu List

Conventions
The following conventions are used in the menu list table.
Underlined values (e.g. ON, OFF, 0): Default settings
Execute by ENTER: Press the CONTROL knob or move the
CANCEL/ENTER lever to the ENTER position to execute.
SYSTEM OPERATION menu
SYSTEM OPERATION
Page name Item
Page No.
<OUTPUT SELECT> OUTPUT
S01
PIX
LASER DIODE
<GENLOCK PHASE> REFERENCE
S02
GENLOCK
SYNC OUT
<MULTI FORMAT> FREQUENCY
S03
CAMERA FORMAT
Note
FREQUENCY or
CAMERA FORMAT
mode setting changes
take effect only after
the CCU power supply
is turned off and then
on again.
Settings
CAMERA, BAR, TEST1,
TEST2
ENC, R, G, B, R&G, G&B, R&B,
RGB
ON, OFF, (ON)
(NONE), (EXT IN)
(HD), (SD)
(OK), (NG)
External reference signal format Displayed only when a reference signal is present.
H STEP When GENLOCK mode is HD:
–3.01 to 3.45 μs 0.00
When GENLOCK mode is SD:
–8.29 to 9.48 μs 0.00
COARSE –99.9 to 99.9 0.0
SC PHASE 0 to 359
V PHASE 0 to 7
HD SYNC, SD SYNC
59.94Hz, 50Hz
(525 NTSC), (625 PAL)
Settings when <HD HDR> (S07)
is OFF:
When FREQUENCY is set to
59.94Hz: 1080/59.94i,
1080/29.97PsF, 1080/59.94P,
1080/23.98PsF, 720/59.94P
When FREQUENCY is set to
50Hz: 1080/50i, 1080/25PsF,
1080/50P, 720/50P
Settings when <HD HDR> (S07)
is LIVE HDR:
When FREQUENCY is set to
59.94Hz: 1080/59.94I,
1080/59.94P
When FREQUENCY is set to
50Hz: 1080/50I, 1080/50P
OETF HLG_LIVE, SDR
Description
Output signal selection
TEST1 and TEST2 are not selectable if there is no
communication with the camera.
PIX connector output signal selection
Turns optical output from CCU on/off
(ON): When using cable that supplies power
Reference signal input status (display only)
CCU GENLOCK mode lock status and signal format
(HD): HD
(SD): SD
External reference signal lock status
(OK): Locked
(NG): Unlocked
Reference signal lock phase adjustments
Horizontal phase (STEP)
Horizontal phase
Subcarrier phase
Vertical phase (line)
SYNC connector output signal selection
Operating frequency selection
Transmission format selection
For details about format settings, see "Signal Format
Setting" (page 13).
Camera OETF (display only)
23