Table of Contents
Advertisement
Status Display
The CCU system status can be monitored using a picture
monitor connected to the PIX output.
For details about checking and changing settings, see "Setup
Menu" (page 19).
Displaying the Status Screen
The status screen is controlled using the knob and levers in
the MENU control block on the front panel.
DISP/MENU lever and indicator
MENU
DISP
CANCEL
MENU
ENTER
CONTROL
CONTROL knob
To display the status screen
Set the DISP/MENU lever to the DISP position.
The most recently viewed status screen page is displayed
(when first powered on, the camera settings page is
displayed).
Turning the CONTROL knob changes the displayed page.
To exit the status screen display
In status screen display mode, set the DISP/MENU lever to the
DISP position.
Status Display Screen
The following information is displayed on the status display
screen.
• Camera settings
• System status
• CCU hardware diagnostics
• Camera system diagnostics
• Network diagnostics
• CCU AT board diagnostics
• CCU DPR board diagnostics
• Front panel diagnostics
• Camera hardware diagnostics
• ROM version information for major components
Camera settings
Page 1
a
b
6dB
1/ 20 00
ND :1 F : 4. 7 EX
e
f
g
a Gain value indicator
Displays the video output signal gain (dB units).
Becomes the AGC indicator when AGC is on.
b Shutter speed/Clear scan frequency indicator
Displays the shutter speed. When ECS is on, the clear scan
frequency is displayed.
At slow shutter speeds, the number of frames is displayed. In
auto shutter mode, AE (Auto Exposure) is displayed.
c Shutter/ECS/Slow shutter on/off indicator
Displays the shutter/ECS/slow shutter on/off state.
d Camera auto control information area
Top: Displays the Auto Setup category and execution status.
Bottom: Displays the execution item.
e ND filter indicator
Displays the current ND filter selection.
f F-stop value indicator
Displays the lens F-stop value (iris value).
g EX (lens extender) indicator
Displayed when the lens extender is in use.
Notes
• Items that are turned off using the <DISPLAY> page settings of the
CCU CONFIGURATION menu are not displayed.
• A "-" mark is displayed for each item when a camera is not
connected.
h CC filter indicator
Displays the current CC filter selection.
Page 2
6dB
1/ 20 00
Wh it e
R:
0
G:
0
B:
0
BL K γ
:
0
DT L
:
0
ND :1 F :4 .7 E X
White: White balance R/G/B value
Black: Black balance R/G/B/Master value
BLK γ: Black gamma value
16
c
d
O FF
C C: A
h
OF F
B la ck
R :
0
G :
0
B :
0
M :0 .0
Fl ar e
R :
0
G :
0
B :
0
Hide quick links:
Advertisement
Table of Contents
