Sony HXCU-FB80 4K/HD Operating Instructions Manual page 27

CCU CONFIGURATION
Page name Item
Page No.
2SI DIAMOND
MARKER
GRAY
<BAR CHARACTER> BAR CHARACTER
C02
<ALL CLEAR>
<MONITOR 1> CHARACTER
C03
PIX CHARACTER
Settings
OFF, ON
ON, OFF
WHITE LEVEL 0.0 to 107.0% 71.5
BLACK LEVEL 0.0 to 107.0%
WHITE LEVEL 75.0 to 107.0%
BLACK LEVEL 0.0 to 25.0%
Description
Sets diamond mark superposition on the color bar for 4K 2
sample interleave output.
4K 2SI diamond marks
This function is for displaying a test pattern like the
following in the area at the bottom right of the 4K color bar
when 4K 2 sample interleave output. OK is displayed if the
connections for Links 1 to 4 are correct, and OK is not
displayed if they are incorrect. This function can be used
to check the connections.
ON: Gray screen output when camera power supply is off
OFF: Color bar signal output when camera power supply
is off
Settings for strings 1 to 12 that are superimposed on the
color bar signal
Execute to clear all character strings (Execute by ENTER)
Bar character settings
White level settings for bar character strings
Black (font border color) level settings for bar character
strings
PIX output character settings
White level settings for PIX output character strings
Black (font border color) level settings for PIX output
character strings
27
Correct connections
When Link 1 and Link 2
have been swapped