Napoleon HIGH COUNTRY 3000H Installation And Operation Manual page 29

fi nishing
EN
D
C
Insert the probe on an angle and gradually straighten
Slide the straightened probe into the hole.
the probe so that it aims down.
E
F
Ensure the catalyst temperature monitor indication light
Attach the bracket to the ash lip with screw (provided).
is visible through the lower trim.
G H
Rear view*
Reinstall top and bottom
trim.
PROBE / SONDE
*Some components are hidden
Attach the thermocouple to the designated port on the catalyst temperature for illustrative purposes.
monitor. Only connect one thermocouple to the device.
29
W415-1761 / B / 12.21.18