Nibe F1145-5 Installer Manual page 40

Symbols in the display
The following symbols can appear in the display during
operation.
Symbol Description
This symbol appears by the information
sign if there is information in menu 3.1 that
you should note.
These two symbols indicate whether the
compressor or addition is blocked in F1145.
These can, for example, be blocked depend-
ing on which operating mode is selected
in menu 4.2, if blocking is scheduled in
menu 4.9.5 or if an alarm has occurred that
blocks one of them.
This symbol appears if periodic increase or
lux mode for the hot water is activated.
This symbol indicates whether "holiday
setting" is active in 4.7.
This symbol indicates whether F1145 has
contact with NIBE Uplink.
This symbol indicates the actual speed of
the fan if the speed has changed from the
normal setting.
Accessory NIBE FLM is needed.
This symbol indicates whether solar heating
is active.
Accessory needed.
This symbol indicates whether pool heating
is active.
Accessory needed.
This symbol indicates whether cooling is
active.
Accessory needed.
40 Chapter 7 | Control - Introduction
Blocking the compressor.
Blocking additional heat.
NIBE F1145