General Safety Guidelines
∆
Ensure safe working environments and practices to local codes
∆
Use personal protective equipment during installation
∆
Use mechanical methods of raising and installing masts over 6 m
∆
Cordon off area below installation point
∆
Check for overhead powerlines or any other obstructions before lifting or raising
∆
Ensure enough man power to safely conduct all aspects of installation
Recommended Installation Method
∆
The installation must conform to all relevant local standards and regulations.
To assist in the installation of the Stormaster ESE terminal and accessories, refer to drawings
as illustrated on pages 8 to 15.
1. Installation of the lightning earth.
2. Installation of the HVSC Plus downconductor.
3. Lower termination of the HVSC Plus downconductor and connection to the lightning earth.
4. Upper termination of the HVSC Plus downconductor and connection to the Stormaster ESE
terminal.
5. Preparation and raising of the mast into position.
www.lpi.com.au
LIGHTNING PROTECTION INTERNATIONAL PTY LTD
7