Lightning Strike Recorder (Lsr1) - Lightning Protection International Stormaster ESE 15 Installation Manual

Inline coupling
Make sure the base will not slip during the lift
Figure 39.

Lightning Strike Recorder (LSR1)

The Lightning Strike Recorder (LSR1) should be installed at a position along the downconductor
length where it can be accessed easily for inspection. Typically the LSR1 should be installed
approximately 1.5 m from ground level or alternatively within the earth pit at the lower
termination point of the HVSC Plus.
When installing the LSR1 the following should be considered:
∆
The LSR1 should be mounted away from areas where damage may occur due to theft,
vandalism or nearby operations
∆
The LSR1 can be enclosed in a security enclosure but the display should be kept visible to
allow for the checking of recorded strikes
42
LIGHTNING PROTECTION INTERNATIONAL PTY LTD
Secure
guying
Removable gin pole
and associated
rigging
Protect the
HVSC Plus
from abrasion
during the lift
www.lpi.com.au