Upper Termination Instructions For Utermkit-Mk3 (Heatshrink) - Lightning Protection International Stormaster ESE 15 Installation Manual

HVSC Plus cable has an outer diameter of approximately 35 mm and has an aluminium
stranded centre conductor and copper tape screen (which can be easily seen from the
end of the cable).
This Termination Kit will not work with any other cable.
Tools and parts required for the completion of the HVSC Plus Upper Termination include:
∆
Compression or mechanical crimping tool (for 50 mm² crimp lug)
∆
Sharp knife
∆
Scissors
∆
#2 Phillips head screwdriver
∆
Shifting spanner (or 17 mm spanner/socket)
∆
Heat gun or gas torch (LPG)
∆
Tape measure (metric)
∆
Combination pliers/cutters
∆
Mast base assembly (supplied with the Stormaster Terminal)
Upper Termination Kit consists of:
∆
Instructions
∆
1 x Roll of semi-conductive tape
∆
1 x 50 mm² crimp lug
∆
2 Heatshrink tubes (1 x 1200 mm & 1 x 600 mm length)

Upper Termination Instructions for UTERMKIT-Mk3 (Heatshrink)

The diagram below (Figure 22) shows the different layers of the HVSC Plus cable and
indicates their names as referred to in the following instructions:
Black Inner
Filler
Inner Aluminium
Conductors
Figure 22.
www.lpi.com.au
Black Insulation
with Semiconductive Outer
LIGHTNING PROTECTION INTERNATIONAL PTY LTD
Black
Outer Sheath
Outer Copper
Screen Tape
31