Table of Contents
Advertisement
Figure 42.
Lightning Strike Recorder (LSR1)
The Lightning Strike Recorder (LSR1) should be installed at a position along the downconductor
length where it can be accessed easily for inspection. Typically the LSR1 should be installed
approximately 1.5m from ground level or alternatively within the earth pit at the lower
termination point of the HVSC.
When installing the LSR1 the following should be considered:
41
Document 36 II Guardian
Version 1.02
© Copyright 2008 LPI
Guardian Install Manual V12.indd 43
22/9/08 4:25:27 PM
Advertisement
Table of Contents
