Table of Contents
Advertisement
JX3-AO4
Invalid Operating System
Detecting the Error
Root Cause of the Error
Response of the Module
to this Error
Fixing the Root Cause
Resetting the Error
Related Topics
Jetter AG
After power-up, the JX3-AO4 module checks, if there is a valid operating
system.
The following conditions can lead to this error:
Terminating an operating system update
Hardware error of the JX3-AO4 module
The module reacts to the error by passing through the following stages:
Stage
1
The module outputs 0 at the analog outputs.
2
The D2 LED is shortly flashing red.
3
The version number in MR 9 is 255.x.0.0
x: Version of the bootloader
For fixing the root cause, proceed as follows:
Step
1
Carry out an operating system update via JetSym.
2
an operating system update cannot
be carried out,
For resetting the fault, proceed as follows:
Step
1
Restart the JX3 station.
Register Description – Locating of Errors (see page 134)
Description
Action
If ...
send the JX3-AO4 module to Jetter
AG for repair.
Action
Locating of Errors
... then ...
131
Advertisement
Table of Contents
