Ethernet Port; Connecting A Device To Com2 Or Com3 Using Rs-485 (Without Optional I/O) - Emerson FB1200 Instruction Manual

Emerson FB1200 Flow Computer Instruction Manual
D301782X012
March 2019
Figure 2-34: Connecting a Device to COM2 or COM3 Using RS-485 (without optional I/O)
1
2
3
Regardless of the interface standard (RS-232 or RS-485), you must use FBxConnect to configure
the port for proper usage.
2.13.3

Ethernet Port

The Ethernet port is a standard 8-pin 10/100Base-T RJ-45 modular connector located on the
terminal plate. Connect to the Ethernet port using the appropriate Category 5 shielded patch cable
Note
The default IP address for the Ethernet port is 192.168.1.10; the default port is 20000.
48
RS-485 port (COM2) on FB device
RS-485 port on external device
RS-485 port (COM3) on FB device
Installation