Figure 2-18: Housing Rotation Set Screw (1 each side)
1
DANGER
EXPLOSION HAZARD: Ensure the area in which you perform this operation is non-hazardous.
Performing this operation in a hazardous area could result in an explosion.
3.
4.
5.
Installation
Set Screw (one each side)
Loosen the two housing rotation set screws.
Rotate the housing no more than 180 degrees from its original (as-shipped) position.
Re-tighten the two housing rotation set screws. Torque to 6 in-lbs. (0.7 N m).
Emerson FB1200 Flow Computer Instruction Manual
D301782X012
March 2019
25