The E5406A-Pro Series 34-Channel Single-Ended Soft Touch Probe (For Analyzers With 90-Pin Cable Connectors) - Agilent Technologies E5406A-Pro Series User Manual

The E5406A-Pro Series 34-channel Single-ended Soft Touch Probe
(for analyzers with 90-pin cable connectors)
E5400-Pro Series Soft Touch User's Guide
Overview, Installation, and Selection of Probing Options
The Agilent E5406A- pro series probe is a 34- channel,
single- ended, soft touch probe compatible with the Agilent
logic analysis modules listed in
capable of capturing data up to the rated maximum state
(synchronous) analysis clock rates of all the supported
analyzers, with signal amplitudes as small as 250 mV
peak- to- peak. A retention module must be installed on the
target system board to attach the probe to the board.
A kit of five retention modules are supplied with each
probe. Refer to "Ordering retention modules"
information on ordering more.
See "Mechanical Considerations"
information on designing your target system board.
E5406A-pro series
34-channel
single-ended
soft touch probe
E5403A retention
module
Figure 5 E5406A-pro series single-ended soft touch probe and
E5403A retention module
Table 1 on page 12. It is
on page 13 for
on page 19 for
1
17