Polycom VVX 300 Series Quick Start Manual page 2

Installing Your Phone Without
Power Over Ethernet
1a: ConneCt power to Your phone
If your network is not Power over Ethernet enabled,
use the optional power adapter. Connect it to
and plug the other end in to a 120V AC outlet.
Proceed to
Power
{or}
Step 1b
Headset LAN
Quick Start Guide – VVX 300 & 400 Series
With Power Over Ethernet
1b: ConneCt Your phone to the loCal
area network
If your network is Power over Ethernet enabled, you
do not need the power adapter and should simply
connect an Ethernet cable into your existing local
area network and into the
of your OfficeConnect® phone.
2: ConneCt Your phone handSet
Connect your phone handset into the port next to
on the back of your OfficeConnect® phone. You may
also connect a headset into the port next to
the back of your OfficeConnect® phone.
3: ConneCt Your pC to Your phone
(optional)
UniVoIP® can utilize an integrated Ethernet switch
that allows you to connect to your computer without
requiring an extra Ethernet wall Port.
To do this, connect one of the provided Ethernet
cables to your computer and into the PC port
on the back of your phone.
PC/Laptop Handset
port on the back
on