Clear The Events Memory - American Panel Walk-in Monitoring System 200 Owner's Manual

OPERATING

8.1. Clear the Events Memory

WIMS 200 memory can store 817 events. When the memory is full, it will take more time to download the data
onto the SD card. Clearing the events memory on a regular basis will ensure faster data downloading onto the
SD card.
Note: Clear the events memory only after the existing data was downloaded, checked and saved!
Before attempting to clear the events memory, the controller has to be in the
"OFF" state.
If it is not, press and hold
Press and
To clear the events memory press
After 10 second, the display will revert to "OFF" state.
22
for 5 seconds.
at the same time and hold for 10 seconds.
.
The display will show:
The display will blink:
The display will show: