Operating Wims 200; Turn On The Controller; Read The Walk-In Air Temperature And The Current Time; Display The Current Date And Time - American Panel Walk-in Monitoring System 200 Owner's Manual

OPERATING

7. Operating WIMS 200

7.1. Turn On The Controller

From the "OFF" state, turn the controller on by pressing
The controller needs to stay on in order to operate. Leave it on at all times.

7.2. Read The Walk-in Air Temperature And The Current Time

When on, WIMS 200 will alternate the inside air temperature display with the
time display.

7.3. Display The Current Date And Time

To display the current date and time, make sure the controller is on and then press
and hold . While holding
illustrated in the figures on the right.

7.4. Display The Door Frame Heater Temperature

WIMS 200 monitors and controls the door frame heater temperature at all times.
To display the door frame heater temperature, make sure the controller is on and
then press and hold
door frame heater temperature. As an example see the illustration on the right.
When is released, the controller will switch back to air temperature display.
18
the display will indicate the readings
for couple of seconds. The display will indicate the
.
Alternating with:
Alternating with:
Alternating with:
(For 10 seconds)
(For 5 seconds)