Siemens SINUMERIK 880 SW 6 Planning Manual page 380

01.93
d)
Read IKA data
The PLC operating system enters the supplied data of data group 03
compensation with absolute values" (IKA data) and the number of words read in the target
DB/DX in the following format. The number of IKA data blocks to be transferred per function
call is limited to four.
Target DB/DX
Bit 15
DW y
DW y+1 Flags
DW y+2 Compensation axis
DW y+3
DW y+4
DW y+5
DW y+6 Flags
DW y+7 Compensation axis
DW y+8
DW y+9
DW y+10
DW y+11 Flags
DW y+12 Compensation axis
DW y+13
DW y+14
DW y+15
DW y+16 Flags
DW y+17 Compensation axis
DW y+18
DW y+19
DW y+20
Overview of the data of the data group 03
_______
d) with GA2, software version 1 and higher
© Siemens AG 1991 All Rights Reserved
SINUMERIK 880 (PJ)
14.4.10 Useful data of the function "read/write NC data via command channel"
DL
Length in words
K P R B Number of the error curve
Basic axis
Weighting factor
Reference point high
Reference point low
K P R B Number of the error curve
Basic axis
Weighting factor
Reference point high
Reference point low
K P R B Number of the error curve
Basic axis
Weighting factor
Reference point high
Reference point low
K P R B Number of the error curve
Basic axis
Weighting factor
Reference point high
Reference point low
d)
(read IKA data)
H
6ZB5 410-0HE02
14 Command Channel (DB 41)
"interpolatory
H
DR
Bit 0
14–29