Siemens SINUMERIK 880 SW 6 Planning Manual page 179

5 Description of Basic Signals (FY 0 ... FY 24)
5.6 Diagnostics (DB 1)
Assignment of the status registers:
Bit
0 DEZNAU
1 Wire-break
2 Transmission error
3 Overtemperature
4 OUTDS
5 Change of configuration input
6 Change of configuration output
7 Module started
Detailed error coding in diagnostics DB (DB 1)
In order to display the PLC detailed error coding on the NC screen ERRCODE error numbers
and the supplementary error data in the diagnostics DB (DB 1) are stored in the data words
c)
160 to 163 or DW 160 to 164
contents of ACCU 1 and ACCU 2 (low words) are stored in data words 166 and 167
DW 160
DW 161 Supplementary error data
DW 162 Supplementary error data
DW 163 Supplementary error data
DW 164 Supplementary error data
DW 165 Spare
DW 166 ACCU 1, Low word
DW 167 ACCU 2, Low word
_______
c) up to and including software version 6
d) with GA2, software version 1 and higher
5–16
Meaning
d)
(equivalent to PG function OUTPUT ADDR:PLC, F0000). The
Diagnostics DB
DB 1
Error number
d)
d)
© Siemens AG 1991 All Rights Reserved
Same as address with
OUTPUT ADDR:PLC
F0000
1st word F0001
2nd word F0002
3rd word F0003
d)
4th word F0004
6ZB5 410-0HE02
SINUMERIK 880 (PJ)
01.93
d)
.