NBS Technologies Advantage M8 Operation Manual page 48

3. Open needle lever by pushing shaft with holding the remaining card.
Remove the card from the Carriage Unit.
* Be careful not to drop the card into the machine (Unless holding the card, it will drop into the machine
when needle lever is opened).
Remaining Needle Lever
Card
Open Needle Lever by pushing the shaft
4. Close Top Cover and lock by the key.
Caution
•
Tipper Unit has a very high-temperature part.
If you make the above process, turn off the power and wait at least 1 hour until the Unit has
been completely cooled down to prevent your arms or hands from getting burned.
Shaft
Push the shaft backward
with holding the card
41
Carriage Unit