Eco Mode - NBS Technologies Advantage M8 Operation Manual

Eco mode

1. This product has the following two different type Eco (Economy Energy) mode. Each mode can be set
independently.
•
Tipper Heater OFF
•
Motor OFF
2. Eco mode can be set for the heater and motor as follows:
i. No ( Not change to Eco Mode)
ii. 10 minutes (When the machine has been kept on standby for 10 minutes or more, it shifts to the Eco
mode )
iii. 30 minutes (When the machine has been kept on standby for 30 minutes or more, it shifts to the Eco
mode )
iv. 60 minutes (When the machine has been kept on standby for 60 minutes or more, it shifts to the Eco
mode )
（Factory default setting is "No" for both of Hopper and Motor）
3. During Eco mode, the following message will be indicated on the Main display.
Eco mode Tipper
Eco mode Motor
Eco mode Both
4. Eco mode is canceled by receiving "Clear Eco Mode" command from the host computer.
Tipper is in Eco mode.
Motor is in Eco mode.
Both Tipper and Motor are in Eco mode.
23