5. Insert the Reel hardware to the Tipper Unit while pulling the knob of reel hardware. At this time, fit a
mounting hole of the Reel hardware into a pin on the cassette.
Knob
6. Insert the Tipper foil into the Unreel flange while pulling the knob in the direction of the arrow.
New Tipper Foil
Unreel Flange
7. Pull out the Tipper foil, and fix the edge of the foil to the paper core with an adhesive tape.
Turn the Reel flange knob counter-clockwise approximately one turn to wind the foil on the reel.
Fix the foil to the Paper Core
Fit this hole to the pin of
Tipper Unit
Turn the knob one rotation
16