NBS Technologies Advantage M8 Operation Manual page 16

Card printer & embosser
Table of Contents

Advertisement

Bad setting example
NG
Card comes out of the Gate
Card
5. Insert the cassette into the main body until it clicks. Close the Front Cover to lock with the key.
Caution
After separating the cards to prevent them from sticking to each other, check that there is
no foreign object in the input hopper, then place the cards into the cassette.
If you see a card edge at the gate, all cards must be taken out from the cassette and
reseated again.
Good setting example
OK
Card is placed in cassette properly
Gate
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents