NBS Technologies Advantage M8 Operation Manual page 15

4. Before putting cards into the hopper, they
must be separated to prevent them from
sticking to each other. Then place the cards
into the desired Hoppers. Place a weight on
top of the cards. Close the Hopper cover
and lock by turning the cassette key
counterclockwise.
Each Hopper can hold a maximum of 50
cards.
Please refer to the Illustration inside of the
cassette to find card setting direction.
Placing the cards in an extremely skew
or acute angle may interfere with proper
card seating and cause card jams.
Set the cards on the sensor pin softly
while keeping them horizontally.
Sensor pin
If the edge of a card is out of the Gate, it may cause card jams. In this case, please remove all cards
from the cassette temporally and reseat them according to the step 4 as above.
Max 50
8
Weight
Max 50 Max 50
Card
NG
OK