Editing A Camera Preset - Cisco TelePresence Series User Manual

Cisco TelePresence System Profile Series, Codec C Series, Quick Set C20, SX20 Quick Set, MX200, MX300
Table of Contents

Editing a camera preset

Most Cisco TelePresence systems let you create
predefined zoom and camera pointing directions—see
the previous page for details on how to define new
camera presets.
An existing preset may have its pan and zoom altered
or the entire preset may be removed.
If you want to change the name of the preset, you
should delete it and create a new preset.
D14582.09 User guide Profile Series, Codec C Series, Quick Set C20, SX20 Quick Set, MX200, MX300
All contents are copyright © 2010–2013 Cisco Systems, Inc. All rights reserved. Version TC6.0, 01.2013
Getting started Video meetings
Adjust zoom
in and out
Use these controls to
define the direction
in which the camera
shall point (also known
as Pan control).
Scheduled meetings
Tap Camera to invoke
the Camera menu.
here
When you have set
the zoom and pan
as required, tap the
preset to be altered.
This will invoke a
submenu.
9
Managing Contacts The Settings
Then tap Show camera controls,
as outlined. Any camera presets
already existing will appear in the
list, as outlined.
In the submenu tap Update to new
position to put your changes into
effect, or tap Remove to delete the
selected preset.
User guide
www.cisco.com