Transferring Calls; Swapping Calls - Cisco TelePresence Series User Manual

Cisco TelePresence System Profile Series, Codec C Series, Quick Set C20, SX20 Quick Set, MX200, MX300
Table of Contents

Transferring calls

Assume you that you are in a call and that you would like to transfer the other party to
someone else. Do as follows:
1. Tap as outlined to invoke the Transfer dialog box.
2. Tap Transfer, as outlined.
3. Select whom to call in the usual way.
4. The following dialog box will now appear and let you transfer the call:
D14582.09 User guide Profile Series, Codec C Series, Quick Set C20, SX20 Quick Set, MX200, MX300
All contents are copyright © 2010–2013 Cisco Systems, Inc. All rights reserved. Version TC6.0, 01.2013
Getting started Video meetings Scheduled meetings

Swapping calls

Assume you are in a call and want to put that call on hold in order to talk to someone
else. Do as follows:
1. Tap Hold, as outlined
2. Tap + Place New Call as outlined.
3. Place a call in the usual way (see left).
4. Tap Swap to go between the two parties.
20
Managing Contacts The Settings
User guide
www.cisco.com