Emc Resilience Mode - Cisco TelePresence Series User Manual

Cisco TelePresence System Profile Series, Codec C Series, Quick Set C20, SX20 Quick Set, MX200, MX300
Table of Contents

EMC Resilience Mode

If the Touch controller is used in environments with
considerable amounts of electromagnetic noise
present, you may experience an appearance of false
signals—as if someone tapped the Touch controller
when obviously nobody did so.
To cope with this you may set the EMC Resilience
Mode to On. You must then press and hold for a
little while, rather than just tap, in order to make the
system aware of your tapping. This will prevent the
appearance of false signals.
D14582.09 User guide Profile Series, Codec C Series, Quick Set C20, SX20 Quick Set, MX200, MX300
All contents are copyright © 2010–2013 Cisco Systems, Inc. All rights reserved. Version TC6.0, 01.2013
Getting started Video meetings
Settings > Administrator Settings > EMC Resilience Mode
Scheduled meetings
48
Managing Contacts The Settings
User guide
www.cisco.com